The Multi-Screen Support System optimally adjusts multiple screens: Edge blending, Color matching and Digital image enlarging.
Edge Blending
ProPresenter Edge Blending Module. This software module enables ProPresenter to create a seamless edge between 2 or 3 projectors, blending them perfectly to create one wide image. A Matrox DualHead2Go or TripleHead2Go is required for this module to work. Either can be purchased below. For more information, see the product page.
The edges of adjacent screens can be blended and their luminance controlled.
Color Matching
This function corrects for slight variations in the color reproduction range of individual projectors.
The PC software assures easy, accurate control.
The PC software assures easy, accurate control.
Digital Image Enlarging
The PT-RZ670 Series features a digital zoom function that allows images to be enlarged up to 10 times (horizontally and vertically).* Up to 100 units (10 x 10) can be edge-blended at a time to create large, multi-screen images.
* While the input resolution will not change, maintaining image quality will not be possible for those images that are enlarged horizontally and vertically via the digital zoom function.
The Backup Input Setting allows the signal to be switched to the backup input signal as seamlessly as possible when the input signal is disrupted.*
This function ensures high reliability and is ideal for critical control rooms, projection mapping, staging, and other applications where images should not be interrupted.
This function ensures high reliability and is ideal for critical control rooms, projection mapping, staging, and other applications where images should not be interrupted.
* The combination of the primary/secondary input terminals is fixed. Use the combination of DVI-D (primary) and HDMI (secondary) terminals. The Backup Input Setting is enabled only when the input signal to the primary and secondary terminals is the same.
Note: Please contact your sales representative for information on the Backup Input Setting.
(Contact Information)
(Contact Information)
If the main signal is disrupted,
the image is simply cut off.
the image is simply cut off.
Even if the main signal is disrupted, the back-up signal appears as seamlessly as possible.
This function automatically corrects the brightness fluctuations that occur over time in the individual projectors of a
multi-screen system. Up to eight projectors can be controlled by connecting to each other via a hub, and this can be increased to a maximum of 2,048 projectors by using “Multi Projector Monitoring & Control Software.”
multi-screen system. Up to eight projectors can be controlled by connecting to each other via a hub, and this can be increased to a maximum of 2,048 projectors by using “Multi Projector Monitoring & Control Software.”
By using built-in brightness and color sensors, the PT-RZ670 Series automatically maintains brightness,
high contrast and color uniformity.
Excellent picture quality is maintained for a long time, and a variety of professional applications are possible.
high contrast and color uniformity.
Excellent picture quality is maintained for a long time, and a variety of professional applications are possible.
With the PT-RZ670 Series, projection is possible in any direction vertically and horizontally, and the unit can be rotated 360 degrees for installation at any angle.
The wide adjustment range of the powered horizontal/vertical lens shift* function assures convenience and versatility during installation. It lets you easily make adjustments with the remote control.
The wide adjustment range of the powered horizontal/vertical lens shift* function assures convenience and versatility during installation. It lets you easily make adjustments with the remote control.
Omnidirectional Installation Capability
* Optical axis shift cannot be operated with the ET-DLE055, and the optical axis is fixed with the ET-DLE030.
This function adjusts the image for projection onto spherical, cylindrical and other specially shaped screens. You can make the adjustment easily using only the remote control, with no external equipment needed and also, up to three sets of adjusted data can be stored as PC1, PC2 and PC3.
New 4-Corner Adjustment and Keep Aspect Off functions also simplify fine adjustment.
New 4-Corner Adjustment and Keep Aspect Off functions also simplify fine adjustment.
Each corner can be independently adjusted.
You can keep the aspect on when correcting curves. To make effective use of the screen area, you can also turn the aspect-keeping function off.
Note: Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer.
The Geometry Manager Pro software offers a more flexible and complex geometric adjustment capability, and supports color matching and edge blending for multi-screen projection. It also makes adjustments for multiple projectors fast and easy over a network.
* For more details on the Geometry Manager Pro software and optional upgrade kits, please visit the above website.
Optional ET-UK20 Upgrade Kit Featuring Geometry Manager Pro (PT-RZ670)
This plug-in software for Geometry Manager Pro enables creative masking using four lines and/or bitmap data, uniformity correction, and other useful functions.
ET-UK20 | |
---|---|
Supported Projectors | PT-RZ670 |
Connection | LAN / RS232C |
OS | Windows® 7 / Windows® 8 / Windows® 8.1 |
Number of Projectors | 32 sets (ver.1.xx) / 64 sets (ver.2.0 or later) |
Key Functions | - Geometric Adjustment - Edge Blending - Masking - Uniformity Control - Multi PJ / Screen Pro Adjusting Software |
Activation Method | - Get the Activation code through 'PASS' System |
Masking Function
Set masking by line.
Use it to overlap the projection image.
The image is projected only in the designated areas.
Create masking data.
Use it to overlap the projection image.
The image is projected only in the designated areas.
* Detailed masking is also possible with an image of up to 1,920 by 1,200 pixels.
Optional ET-CUK10* Auto Screen Adjustment Upgrade Kit (PT-RZ670)
The ET-CUK10 Auto Screen Adjustment Upgrade kit activates the Auto Screen Adjustment plug-in software. This plug-in software for Geometry Manager Pro sets up multiple projectors automatically and simultaneously, greatly saving installation time and costs. It takes only three quick and simple steps. By using a camera** together with a PC connected to the projectors via a network, this software calibrates and adjusts multi-screen or curved-screen projection. Adjustments include geometric adjustment, edge blending, color matching, stacking, brightness, and black level.
* Available for use worldwide except in the United States. Updates of projector firmware and Geometry Manager Pro software are required.
** Supported cameras are Nikon D5200/D5300 or successor models.
The laser light source does not require time to warm up, so the image appears almost instantly with the PT-RZ670 Series projectors.*
There’s also no cooling time required when turning the power off,* so you can quickly turn the projector on and off as many times as needed.
There’s also no cooling time required when turning the power off,* so you can quickly turn the projector on and off as many times as needed.
* The Quick Start/OFF feature is possible by updating the projector's
firmware to MAIN Ver. 1.10 or later.
firmware to MAIN Ver. 1.10 or later.
Maximum brightness is reached as soon as the
light source goes on.
light source goes on.
Firmware Update Required
The Quick Start/OFF feature is possible by updating the projector's firmware to MAIN Ver. 1.10 or later. When the main version of the firmware is lower than 1.10, access the latest firmware version information page on PASS to download the latest upgrade tool.
Note: To check the firmware version, press the <STATUS> button on the remote control. The [MAIN VERSION] of the firmware can be checked on the [STATUS] menu screen.
Note: Please contact your sales representative for information on the Quick Start/OFF feature. (Contact Information)
Choose from a wide lineup of lenses for your system, including long-throw zoom lenses and a ultra-short-throw lens for rear projection use.
The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease.
The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease.
The ET-DLE030 ultra-short-throw lens enables 100-inch projection from a distance of 0.82 m (2.7 ft). This is a powerful solution for the hassles of installation in narrow spaces.
Requires sufficient airflow space around the projector. This throw distance shows the case
of the PT-RZ670.
of the PT-RZ670.
![Edge Blending Software For Projectors Edge Blending Software For Projectors](/uploads/1/2/5/8/125839006/800849455.jpg)
For example, promotional images can be projected even in the narrow space of a retail store showcase, where image projection is not possible with a general-purpose lens.
NOTE: The usage examples shown above are simulated images.
In actual installation, a predetermined amount of space must be provided around the projector.
In actual installation, a predetermined amount of space must be provided around the projector.